23.8" Flanders Scientific BM240 Broadcast LCD Monitor

Description

These are used units in very good condition.
Overview
The
23.8" Flanders Scientific BM240 Broadcast LCD Monitor
(Full HD 1920x1080) is designed for editorial and broadcast operations that require an accurate and stable display with a full complement of professional features and capabilities. The monitor includes a desktop stand.
This lightweight 23.8" Multi-Format broadcast monitor includes 3G/Dual-Link/HD/SD-SDI, Component, Composite, & DVI-I Inputs. Like all BM series monitors, this unit features full 12-bit video processing and a native 1920x1080 resolution, plus 8-bit panel capable of reproducing over 16.7 million colors on screen. The BM240 offers support for virtually any signal format from NTSC/PAL to HD and 2K, including advanced 12-bit, 4:4:4, and XYZ signal formats.
Features:
Support of Advanced SMPTE 425M-AB Signal Formats
12-bit Video Processing
On-screen Indication of Source Frame Rate and Resolution (toggle on, off, or 5 second display)
Display
CX Scale for Full Screen & Centered Scaling of Codex ARRIRAW Recorder Output
8-bit LCD (16.7 Million Colors)
HD Anamorphic De-Squeeze (1.3x, 1.3x Mag, 2.0x, 2.0x Mag)
(2) Input Picture & Picture Display with Adjustable Horizontal or Vertical Wipe Position
Wide Variety of Standard Markers and Safety Areas
AFD Reader
Overscan & 1:1 Scan
Timecode Display (VITC1, VITC2, & LTC)
On-screen Alarms (IRE Threshold, RGB Alarms, Loss of Signal, Audio Mute, and More)
H/V Delay
Connectivity
3Gbps SDI & Dual Link Standard
Scopes & Tools
Adjustable Focus Assist (Focus Meter and Focus Highlight in Red)
Pixel Zoom Features for Artifact-Free Zoom on Any Portion of HD Signal
Vectorscope with Adjustable Intensity and Gain Expansion
RGB Overlay with Adjustable Intensity
YCbCr Scope with Adjustable Intensity
CIE Scope
Custom Markers and User Adjustable Graticules
Luminance Waveform with Adjustable Intensity
Histogram, Color Histogram, & RGB Histograms
Advanced Pixel Level Measurement Feature
CIE Measurement Tool
Modes & Color
C-Log, S-Log, S-Log2, S-Log3, and BMD Film Log Monitor Modes
Selectable Color Temperature Presets
Advanced 3D LUT Based Calibration (compatible with LightSpace, CalMAN, and Fuji)
Store up to 16 instantly selectable 3D DIT (Look) LUTs
SD Aspect Ratio Selection Including PAL SD FHA, Anamorphic, & 4:3
3D Signal Analysis Modes Including 3D Disparity and Checkerboard
Blue Only, Red Only, & Green Only Modes (as Color or Mono)
4:4:4 YCbCr, RGB, & XYZ Signal Support
DSLR Zoom for Full Screen Scaling of DSLR Sources
Active Video Boundary Marker
Monochrome Mode
Hue Vector with Adjustable Reference Vector Line
Column (YRGB) Scope
YCbCr Overlay Scope with Adjustable Intensity
Color Code RGB and GBR Parade Scopes
Adjustable Gamma selection (1.0~2.8)
Audio
16 Channel Audio Level Meters (PPM1, PPM2, True Peak)
16 Channel Audio Loudness Meter
Audio Phase Meter (Select Any Stereo Pair)
Audio Disembedding to Built In Speakers or Audio Output (Synced to Video Display)
Power
Low power consumption of only 30 W
Physical
Lightweight monitor weighs 10 lb (4.5 kg)
The BM240 is an affordable monitor designed for editorial and broadcast operations that require an accurate and stable display with a full complement of professional features and capabilities.
Color Management
FSI’s 2nd generation Color Fidelity and LUT Interpolation Engine (CFE2) houses multiple 4,913 point (17
3
) calibration and DIT (look) LUTs for highly accurate color reproduction and effective look management. Instantly select from Rec709, EBU, SMPTE-C, DCI P3, Rec2020 Emulation*, Native Wide Gamut, and Custom User Generated color spaces.
Additional gamma, peak luminance, and color temperature toggles further add to the versatility of this monitor.
All CFE2 equipped monitors also feature an easy to use menu toggle to instantly switch between data (full) range monitoring or video (legal) range monitoring modes.
*Does not fully cover Rec2020
Calibration
FSI monitors come pre-calibrated from the factory and free recalibration is always available for customers that would like to send their units in to an FSI service department.
Quickly and easily perform your own 3D LUT based calibration with advanced color management solutions like LightIllusion's ColourSpace CMS or SpectraCal's Calman.
Enterprise-level clients that own a large number of
BM240
can also take advantage of FSI’s Volumetric AutoCal using a Minolta CA310.
Look / DIT LUTs
Upload and store up to 16 3D Look / DIT LUTs and instantly toggle between them using the up and down buttons.
Video Scopes
A wide variety of scopes and meters are available. Display up to two scopes on screen at a time. Scopes can be positioned in any of 6 on-screen positions. When using two scopes the scope windows can be stacked horizontally or vertically depending on your preference. Video scopes work across all inputs, even DVI.
RGB Parade
Parade waveform. Adjustable parade intensity. Levels above or below 100IRE show in white for easier identification.
Audio Meters
This monitor features several audio metering tools as well as the ability to disembed any single channel or stereo pair of audio to the monitor’s internal speakers or audio line out. Disembedded audio is always delayed by the exact amount of video processing time to ensure proper lip-sync.
Horizontal Audio Level Meters
Display 2, 8, or 16 channels of audio arranged in audio groups or stereo pairs with real-time numerical display of dB levels per channel. Meters feature adjustable Alignment Level, Permitted Max Level, and Peak Hold Time. Select between True Peak, PPM Type I, or PPM Type II ballistics. Meters will indicate NO DATA if an audio group is not embedded in the signal to differentiate it from audio channels that may be mute, but still embedded.
Vertical Audio Level Meters
16 channel audio level meter display with adjustable Alignment Level, Permitted Max Level, and Peak Hold Time. Select between True Peak, PPM Type I, or PPM Type II ballistics. Meters will indicate NO DATA if an audio group is not embedded in the signal to differentiate it from audio channels that may be mute, but still embedded.
CIE Scope
A dedicated function that maps full frame signal data onto your choice of CIE1931 x,y or CIE1976 u’,v’ diagrams. Signal information is shown relative to your active color space and can be compared to a selectable secondary color gamut.
Measurement (8 & 10bit)
Get precise real-time YRGB measurements, both as a percentage and 8 or 10bit data values, of any point or sample area within your incoming signal. Set a spatial and temporal reference and compare with any other point to quantify the difference in values between any two points. Also quantify the difference in points as an F/stop value.
CIE Measurement
Visualize any point or sample area within your incoming signal on your choice of CIE 1931 x,y or CIE1976 u’,v’ diagrams. Values are shown relative to your current operating color space and regardless of diagram mode R’,G’,B’, Y%, x,y,u’,v’ values are reported at all times. As with the standard measurement mode a reference position can be selected and compared to any other position. The difference between current and reference positions is also quantified with a dE2000 value.
Video Data Analyzer
Provides real-time readout of video data at the pixel level in your choice of decimal or hexadecimal values. Can show pixel level information as YCbCr or RGB as well as 8bit or 10bit.
This feature can be used in combination with the H/V delay mode for horizontal and vertical blanking data analysis.
Markers
Choose from a wide assortment of standard markers and safety areas that can be displayed as lines, translucent overlays, or solid overlays. Lines and overlays have selectable colors for instant customization.
Don't see the marker you need here? Send it to us as a 1920x1080 .bmp file and we can add it in a future firmware update.
14:9
14:9 CS
15:9
16:9
16:9 in 4:3
17:9
32:9
ADOBE
DISCOVERY
Crosshatch
Generate an onscreen grid overlay with the Crosshatch function to help with camera pitch and angle relative to screen content.
Custom Graticules
Create custom rectangular markers quickly with the Custom Graticules feature that generates four movable lines on screen. Graticule line position and span between lines is reported for easy reference.
Live Side-By-Side Monitoring
FSI's unique live side-by-side monitoring feature allows for mixed formats, mixed frame rates, and even mixed input types to be viewed together in PAP, PIP, or POP configurations.
Split-Screen Viewing
Horizontal and vertical split-screen viewing with adjustable split positioning is also possible with two sources that share the same resolution and frame-rate.
Source 2
Source 1
Lum Coloring (Adjustable Exposure Check)
Adjustable false color display of luminance values. 4 adjustment points allowing you to establish specific target areas to be shown in false color or greyscale.
Timecode
Size and position adjustable onscreen display of VITC1, VITC2, or LTC timecode pulled from SDI signals.
Tally Lights & Record Status Tally
Tally Light or on-screen indication of camera record flag status pulled from SDI ancillary data. Lets you know when your camera is recording without needing additional equipment.
*Not compatible with all cameras. Camera must output recognized SDI flag. AM420 and AM550 have on-screen tally only.
Zoom Modes
Pixel Zoom
For HD signals. Allows for highly adjustable artifact free zoom on any section of the image.
Zoom
For letterboxed SD content. Zooms in while preserving aspect ratio so that a 16:9 portion of the SD image is scaled full screen.
DSLR Zoom
Scales DSLR output so that only the portion of the image that will actually be captured to video is shown. Works with both SD and HD DSLR output.
Full Screen
Stretches the incoming signal to fill screen, built for use primairly with rasterizers that output 1024x768 signals intended to be stretched to 16:9 by a connected display.
CX Scale
Centered and zoomed-in display of the gate check output from a Codex ARRIRAW Recorder. This allows for easy fullscreen monitoring of the gate check output.
Overscan
5% Overscan Display.
Pixel Mapping
Allows for 1:1 and 2:1 pixel mapping of sources when their resolution is different than the native resolution of the panel. This feature is also capable of scaling 2K signals to fit or be shown 1:1 with the ability to move left to right so any portion of the 2K image can be shown 1:1.
1:1 Pixel Mapping (SD)
2:1 Pixel Mapping (SD)
1:1 Pixel Mapping (720p)
Pixel Mapping (2k Source)
SD Aspect Ratio & PAL SD FHA
Allows users to toggle from 4:3 to anamorphic display of SD signals. Can be combined with the pixel mapping feature for proper display of PAL SD FHA signals.
Anamorphic De-Squeeze
1.3x, 1.3x mag, 2.0x, and 2.0x mag anamorphic de-squeeze for use with HD signals.
Blue Only, Red Only, Green Only, and Monochrome
Blue Only, Blue Only Mono, Red Only, Red Only Mono, Green Only, Green Only Mono, standard Monochrome
Onscreen Alarms
Allows for unobtrusive signal monitoring with alarm window only appearing in case an actual alarm condition is met. Available alarms include adjustable IRE threshold exceeded, RGB legal levels exceeded, video black or video blue on screen for extended time, audio loss with adjustable time-without-audio trigger setting, and audio out of phase warning.
H/V Delay
Horizontal and Vertical delay function with auto brightness increase to make analyzing vertical and horizontal blanking areas easier.
AFD Reader
The Active Format Description reader provides both a textual readout of AFD data as well as corresponding markers highlighting the information contained within the AFD code.
Safety Broadcast
Control Room and QC station monitoring mode that allows for simultaneous display of Timecode, Source ID, 2 channels of audio, and alarms.
UMD/OMD Display
Manual or remotely controlled source ID display on screen.
Max Sharpness & Focus Assist
Adjustable max sharpness and focus assist viewing modes.
Log Monitoring Modes
C-Log, S-Log, S-Log2, S-Log3, and BMD-Log monitoring modes allow for rough normalization of C-Log, S-Log, S-Log2, S-Log3, and BMD Film Log signals.
Original
Log Monitoring Mode
3D Disparity
A disparity view highlighting the difference between SDI1 and SDI2 inputs. Sources must be the same frame rate, resolution, and genlocked.
Still Frame
Pause on a single frame of an incoming source with a simple button press.
LED Lights
Allows users to turn off the monitor keypad's LED Lights for optimal viewing in dark envrionments.
Luminance Interval
Optional power saving feature especially useful in control room applications. Monitor will go into low power draw standby mode when no signal is present for the amount of time specified.
Remote Control
The IP Remote Utility  can be used to remotely toggle functions, switch inputs, and navigate the menu on Flanders Scientific monitors using your Mac or PC's keyboard, mouse, or control panel. Also available for iOS devices.
GPI Contact Closure is also supported.
Videos